Powerful and Effective
Professional strength. Used by pet and cleaning professionals. Exclusive Patented Encapsulation Technology and Advanced Eliminator Formula.

All Natural Ingredients:
Cane sugar derivatives, proprietary botanical extracts and hydrated cellulose (cleaning agents), purified water and nitrogen propellant (non-flammable & eco friendly.)

Quick and Easy
Works on contact. Just spray - no need to soak, scrub or rinse.

Safe and Eco Friendly
Safe on all water-safe surfaces. Environmentally Responsible Formulation: non-toxic, non-flammable, non-corrosive, non-carcinogenic,biodegradable and natural propellant.

Advanced Eliminator Formula

Cleaner	Yes
Stain Remover	Yes
Odor Eliminator	Yes
Technology	Encapsulation - Patented
Delivery System	Aerosol - Hi Performance
Manufacturing Origin	United States

Spray: Direct (Stream)

DIRECTIONS: Shake can before spraying.
CARPETS, AREA RUGS AND UPHOLSTERY
1. Remove excess urine, cat spray, feces, hairballs or vomit.
2. Spray on hidden area to test for color fastness.
3. Spray directly on carpet stain and odor spot so it’s damp, not soaked. (When urine soaks into carpet, it spreads underneath. Make sure to spray an area larger than urine spot.)
4. Allow area to dry. Look and sniff to see if stain and odor are completely gone. If not, product did not come in direct contact with problem source. Repeat step #3 as needed.

IF ODOR RETURNS: Urine may have reached carpet pad. You can spray carpet again, but for best results, pull up carpet and spray pad. For old stains or severe urine soaking, you may need to reapply several times.

No need to soak or scrub. Just make sure product comes in contact with problem source.

CAREFUL: Spraying the can at an angle greater than 60° may release all the
propellant and cause can to stop spraying.

Carpet

Old & persistent odors: On carpet, there are three scenarios: (1) the odor source has saturated the carpet but not the pad, (2) the odor source has saturated the carpet and the carpet pad, and (3) the odor source has saturated the carpet, carpet pad and sub floor.

Remember, CLEAN+GREEN needs to come in contact with the odor source to work. Once it has made contact, it will encapsulate the odor source and eliminate the odor.

HINT : When urine is deposited on carpet, it will spread in a wider area underneath. Think of a pyramid; the tip is the surface of the carpet and the base is underneath. So you will have to spray a wider area than just where the urine was deposited.

(1) Use Carpet and spray directly on the affected area of the carpet for 3 to 5 seconds, so that the carpet is wet to the touch (but not soaked). Allow area to dry, and check to see if odor is completely gone. If odor is not completely gone, the spray did not have come in contact with the entire odor source. Reapply the spray to the area that still has an odor, following the directions above.

(2) If there is still an odor present after the second application, it may be that the odor source has saturated the carpet and carpet pad. To get to the odor source, you will need to pull up the carpet and spray CLEAN+GREEN directly on the carpet pad. Also, check the back of the carpet for odor, and if present, spray the back of the carpet. Allow it to dry and check to see if odor is completely gone. If some odor remains apply second application following directions above.

(3) In some cases when odor is severe, the odor source has affected the carpet pad and reached subsurface floor. When carpet pad is severely affected (saturated), we recommend cutting out the affected part of the pad and replacing the carpet padding. Spray the affected concrete subsurface with the product, and allow to dry. If odor is present after drying, apply second application, following directions above. Check for odor after the second application, and if odor is present apply the product again. It is not uncommon for many applications when the odor source has soaked into the concrete.

Note: Concrete is porous, and soaks up liquid . You may need several applications. As CLEAN+GREEN eliminates the odor source on the top layer of the floor, the urine odor source soaked into the deeper layers will rise. Each application gets rid of the old odor source until it is completely gone.

USED ANOTHER PRODUCT BEFORE Clean+Green? If the stain and odor has been treated unsuccessfully with other products, the stain and odor are probably no longer organic and you will need to eliminate the chemicals left behind. To eliminate the remaining chemicals, we recommend that you wet a clean cloth with water and moisten the area. Because the stain and odor has probably been changed, you will need to spray more Clean+Green on the affected spot than you would normally be required to use. Note: In some cases, the stain will set due to the chemicals from previous products and may not come out. However, Clean+Green will still eliminate the odor.